Kalamazoo 10 Inch Industrial High Speed Non-Ferrous Saw, K10HS 3HP TEFC, 3PH (220v or 440v) or 3HP TEFC, 1PH (110 or 220V) Motor. PLEASE SPECIFY PHASE and VOLTAGE AT TIME OF ORDER! 3450 RPM at spindle Single phase amp draws: 115V 24 amps...
Kalamazoo 4 X 60 Inch Industrial Bench Top Belt Sander, S460D 4″ x 60″ abrasive belt, direct drive, vertical position Reversible and replaceable steel platen 4″ x 17″ Adjustable cast iron work table that measures 5″ x 8″ with a 5/8″ slot...
Kalamazoo 10 Inch Industrial Abrasive Mitre Saw, KM10 3HP 1 PH or 3 PH (Specify phase and voltage.) On/Off Switch Steel spindle and motor pulley V-belt driven Cuts 0 to 45 degrees – left or right 5/8″ spindle arbor Replaceable steel...
Kalamazoo 4 X 48 Inch Industrial Abrasive Belt Grinder, BG448 3HP 1PH TEFC motor, 110 or 220V (specify at time of order) and or 3PH 220v or 440V (specify voltage at time of order) 7200 SFPM 1 phase amp draws: 115V FLA is 24 amps and 230V...
Kalamazoo 10 Inch High Speed Non Ferrous Mitre Saw, KM10HS 3HP 1PH 115V or 230V and 3Ph 230V or 460V (specify voltage at time of order) 1PH FLA: 115V 24 amps and 230V 12 amps 3PH FLA: 208B 6.6 amps, 230V 6.4 amps and 460V 3.2 amps Mitres...
Kalamazoo 2 X 72 Inch Industrial Abrasive Belt Grinder, BG272 1HP 1PH or 3PH motor 1PH FLA: 115V 11.8 amps and 230V 5.9 amps 3PH FLA: 230V 2.8 amps and 460V 1.4 amps 2″ x 72″ belt Throat dimensions: H 10″ x D 13″ 7200 SFPM belt speed 5″...
Kalamazoo 2 X 72 Inch Industrial Multi Purpose Belt Grinder, S272 1HP 1PH or 3PH (specify phase and voltage at time of order) 1PH amp draws: 115V amp draw 11.8 amps and 230V 5.9 amps 3PH amps draws: 230V 2.8 amps and 460V 1.4 Manual...
Kalamazoo 4 X 36 Inch Wet Bench Top Belt Sander, S4SWB 4″ x 36″ wet industrial bench sander Parts tray with rubber mat Removable and replaceable steel work stop 4″ wide x 6″ long platen/work area 1/2 hp, 115 vac, TEFC motor Self...
Kalamazoo 6 X 48 Inch Multi Position Belt Sander with Stand, S6MS S6MS – 6″ x 48″ belt Variable position belt sanding head Direct drive One lever quick belt release Cast iron frame Cast iron base Full OSHA safety guard, Heavy duty steel...
Kalamazoo 6 X 48 Inch Combination Belt and Disc Sander, S612 3HP 1PH 220 OR 3HP 3PH 220/440 volt TEFC motor Available with OR without integral vacuum base dust collector Magnetic switch with overload protection Built in 100 CFM dust...
Kalamazoo 3 X 90 Inch Industrial Abrasive Belt Grinder, KS390 8″ OD x 3″ serrated 70 duro contact wheel 2 HP- 1PH 230V (only) and or 3 HP 3 PH 230V or 460V motor 1PH amps: 115V 23 amps and 230V 11.5 amps 3PH amps: 208V 7.9 amps, 230V 7.2...
KKalamazoo 4 X 90 Inch Industrial Abrasive Belt Grinder, KS490 8″ OD x 4″ serrated 70 duro contact wheel 2 HP- 1PH 230V (only) and or 3 HP 3 PH 230V or 460V motor 1PH amps: 115V 23 amps and 230V 11.5 amps 3PH amps: 208V 7.9 amps, 230V...