Kalamazoo 4 X 36 Inch Belt and 10 Inch Disc Combination Sander, DS10-4S

Kalamazoo 4 X 36 Inch Belt and 10 Inch Disc Combination Sander, DS10-4S

DS10-4S 4 x 36 INCH Belt and 10 INCH DISC COMBINATION SANDER Specification

• 10″ disc sander with 4″ x 36″ belt sander
• With full boxed OSHA guard, Horizontal or vertical belt position
• 1/2 HP 1PH TEFC motor, 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps
• Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard
• Optional: Without OSHA guard on 4″ sander, model DS10-4
• Amp Draw: 115V 7.4 amps and 230V 3.7 amps DS10-4S
• Option: available in 50HZ and is CE approved
  
  DS10-4 4 x 36 INCH Belt and 10 INCH DISC COMBINATION SANDER Specification
• 10″ disc sander with 4″ x 36″ belt sander
• With umbrella guard, Horizontal or vertical belt position
• 1/2 HP 1PH TEFC motor, 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps
• Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard
• Optional: Without OSHA guard on 4″ sander, model DS10-4
• Amp Draw: 115V 7.4 amps and 230V 3.7 amps DS10-4S
• Option: available in 50HZ and is CE approved
  
  Other DS10-4S 4 x 36 INCH Belt and 10 INCH DISC COMBINATION SANDER
• DS10-4 same as above but the belt sander has an umbrella guard. DS10-4
  
  This machine is great for but not limited to the following applications
• Bevel an Deburr
• Square and End
• Round Flat Corners
  
  Part replacement
• All parts that Kalamazoo Industries manufacture’s for this DS10-4S combination belt and disc sander are replaceable no matter the age of this unit. Additionally all parts are kept in stock
  
  Where this equipment can be used
• The DS10-4S combination sander has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal Foundries, wood working shops, as well as many other Manufacturing and Fabrication environments that require deburring