Cendrex Fire-Rated Uninsulated Access Door with Drywall Flange, 8 x 8", PFN-GYP 08X08

Cendrex Fire-Rated Uninsulated Access Door with Drywall Flange, 8 x 8", PFN-GYP 08X08, 764728139083

The fire rated uninsulated access door can be used on fire rated walls. The drywall bead flange is not exposed once the drywall compound is applied.

• Material: 16 gauge cold rolled steel
• Hinge: Continuous piano hinge. Hinge location: Hinges must be located on the second dimension (height).
• Locking mechanism: Self-latching tool-key operated slam latch and ring operated slam latch, both included.
• Flange: 22-gauge galvanized steel, 1 ⅛" drywall bead flange
• Frame: 2½ " in depth, made of cold rolled steel
• Rough opening: Door sizes + ¼" or + 6mm
• Inside panel release: Mechanisms to allow panels to open from inside, standard on all doors over 12" X 12 inches.
• Finish: High quality white powder coat primer.
• Packaging: Individually wrapped, 1 door per box.
• Vertical wall assemblies: Fire rated access doors, for vertical use, are subject to the following:
• Vertical wall assemblies: Fire rated access doors, for vertical use, are subject to the following:
• Certification: UL 10B (2009), NFPA 252 (2012), CAN/ULC S104 (R1985), CAN/ULC S104 (2010).
• Rating Achieved: 1-½ hours, neutral/negative pressure
• Maximum size: 36" x 36" (914 mm x 914 mm), maximum area of 1296 in², tolerance on height and width limitation is more or less 3" (76mm) as long as the area does not exceed 1296 in².
• Temperature rise: No rating achieved