Across International Ai Dual-Jacketed 200L 316L-Grade Stainless Steel Reactor, SR200

Across International Ai Dual-Jacketed 200L 316L-Grade Stainless Steel Reactor, SR200

Peer review model lead time: 4 weeks

Ai 316L Grade Stainless Steel Reactor Features

• Dual jacketed. Sealed outer insulation jacket provides best temperature performance inside chamber
• All wetted parts on main vessel and lid built with pharmaceutical grade 316L SST
• Shell and tube heat exchanger with 70 tubes for the best condensing results
• ElectroPolished internal chamber
• Greatly reduces surface roughness by leveling micro-peaks and valleys
• Improved vacuum pressures, out-gassing rates, and pumping speed
• Prolong equipment lifespan by reducing friction and wear
• Much better sterilized and semiconductor grade surface
• Essential for the food and pharmaceutical industries
• Pneumatic stirring motor
• Power: 1/4 HP
• Rotation: 450 rpm max. (±8%)
• Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa)
• Working temperature: -10C to +70C
• For constant use: set rpm to 80% of maximum rpm
• Motor lubricant Daphne Eponex EP-No. 1 Check/replenish/replace every 500 hours
• Air lubricant Type: JIS K2213-1 (ISOVG32) Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32 Speed: 2-3 drops per minute
• For safety purpose, detach compressed air supply when not in use, left un-attended or at night
• Do not run motor un-loaded
• Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM
• Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action.
• Make sure exhaust port/hole is clear from any debris or blockage
• Check every 2-3 days: Air Lubricant, Air Filter water drain
• Detachable condenser and collection tanks
• Dual collection tanks with big sight glass allows you to drain without breaking vacuum
• High drain port clearance for easy draining or added filtration
• Large ports (top 12" bottom 6") allows easy chamber cleaning
• Top placed vacuum port on condenser provides better flow and condensing results
• No messy cable, with space saving integrated stirring motor controller
• Heavy-duty stainless-steel frame with swivel casters
• Built-in flashlight gives you a clear view inside the chamber
• Positive/negative pressure gauge
• Matte finish stainless steel
• Customizable lid for various application
• Tons of tri clamps adapters available, e.g. tri clamp to hose barb/KF25/NPT
• Choice of bolted or pin clamp for various pressure applications
• Flexible bellow condenser connection reduces shipping damage
• Electric motor and controller model is ETL certified to UL and CSA standards
• Peer reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane.

CAUTION!

• Never fill circulated heaters or chillers with water, always use Ai or manufacturer's recommended thermal fluid
• Always leave ample fluid space in heater reservoir to allow fluid heat expansion
• Always keep system vacuum passage or drain valve open when heating up circulation jackets
• Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits